Article Submission

What is the best option available to you if you do not want to waste an entire week in replacing your bathtub? Tub reglazing takes around four or five hours and restores your worn, ragged old bathtub to a new like condition. Tempting right?

The first question that hit you after hearing such a tempting proposition is probably whether you will be able to do it yourself. It is possible that you may be able to accomplish the task yourself. But it can turn fatal if the right precautions are not taken. The first thing you need to keep in mind while reglazing your tub is your safety, as you will have to handle toxic chemicals. You should always work in a well ventilated area as some of these chemicals emit toxic fumes. Wearing safety gloves is another precaution you may take. If it?s possible try to protect every part of your body.

Now you are armed and ready to handle the tub resurfacing situation. Clean your tub properly. It is advisable to remove the caulk and gasket while you are cleaning the tub. Your bath refinishing kit generally has a wide array of chemicals. The first two chemicals are supposed to function as cleaning material. You need to apply the first solution and thoroughly scrub the surface. Once you are done with that apply the second cleaning solution which will make the surface rough and sore.

Next ensure that there is no oil on the surface of the tub in order to provide grip for the ?primer.? The third solution is a solvent that removes any remaining sediment and makes the surface ready for primer. The reducer must be applied with the help of paper towels. After leaving the solution for thirty minutes or so clean the area with the primer reducer and allow the bath tub to dry. The tub should be rinsed again and again to ensure dryness.

The next step is to cover the area where tub refinishing will not be applied. Those areas have to be covered with paper tape. Exercise caution when you are covering those areas with tape. Ensuring a good seal is of cardinal importance. After you have sealed up the rest of the area apply base coat to the tub. During this process ventilation is of utmost importance and should be ensured. Putting on your respirators is also a good idea if you have one. Go through the directions of the manufacturers and mix the primer?s component accordingly. Spray it on the tub with the help of a spray gun or a similar device.

Now you are almost done refinishing your tub. All you need to do now is color your tub according to your wish. Follow the manufacturer?s direction while mixing the paint for the topcoat. After the primer has been applied for thirty minutes or so you can apply the topcoat. For applying the topcoat also you may use a spray gun. After you have applied the topcoat wait for 48-72 hours before using your bath tub. Rather your reglazed bath tub!!

Toby Rutherford is a acknowledged authority on Bath tub reglazing. To get most your queries clarified concerning bath tub resurfacing visit his blog on tub refinishing.